OEC 9400

OEC 9400

Product Description

The OEC 9400 C-Arm system is a versatile entry level unit that is great for a verity of procedures such as Pain Management, General Surgery, Orthopedics, and Vascular Surgeries.

9400 C-Arm X-Ray System

Generator

  • 2.5 kHz High frequency
  • 6.0 kW Full-wave
  • Up to 120 kVp
  • Up to 100 mA for radiographic film exposures
  • Fluoro boost mode up to 20 mA (optional)
  • Pulsed fluoro mode
  • Pulsed fluorography mode up to 60 mA (optional)
  • Full power from outlet:
    • 50 Hz or 60 Hz
    • 100V-15A to 240V-12A

X-Ray Tube

  • Rotating anode X-ray tube
  • Focal spots: 0.3 mm and 0.1 mm
  • Anode heat capacity: 300,000 HU
  • Anode cooling rate: 70,000 HU/min
  • Housing heat capacity: 1,250,000 HU Collimator

Collimator

  • Dual leaf collimation
  • Minimum beam size < 5 X 5 cm2
  • Leaves are continuously variable
  • Remotely controlled from the C-Arm control panel Fluoroscopy Mode

Fluoroscopy Mode

  • Focal spot: 0.3 mm
  • kVp range: 40 – 120 kVp
  • mA range: 0.2 – 5.0 mA normal mode
  • mA range: Up to 20 mA boost mode (optional)
  • Auto, manual and pulsed modes
  • Continuous or One-Shot operation
  • ABS varies mA, kVp and camera gain
  • User specific ABS tables

Pulsed Fluoroscopy Mode (optional)

  • Focal spot: 0.3 mm
  • kVp range: 40 – 120 kVp
  • mA range: 0.2 – 5.0 mA
  • Pulse rate: 1, 2, 4, or 8 pulses per second
  • Pulse width: 30 or 50 milliseconds
  • Computer controlled ABS, mA, kVp and camera gain

Pulsed Fluorography Mode (optional)

  • Focal spot: 0.3 mm
  • kVp range: 40 – 120 kVp
  • mA range: Up to 60 mA
  • Pulse rate: 1, 2, 4, or 8 pulses per second
  • Pulse width: 35 or 50 millisecondsRadiographic Mode

Radiographic Mode

  • Focal spot: 0.3 mm or 1.0 mm
  • Focal spot automatically selected
  • 0.3 mm – mAs range: 1 – 100 mAs
  • 1.0 mm – mAs range: 100 – 3